Mikalor ASFA-S PRO Constant Tension | 12 mm | W3
Brand:
Mikalor
| Article number: | MKL-A-S-W3-CT-016-027 |
| SKU: | 03017800 |
- 2 year warranty
- Delivery time: Delivery in 1 to 2 days
Information
Mikalor ASFA-S PRO Constant Tension | 12 mm | W3 hose clamp / Worm Drive Clip, According DIN 3017
12 mm bandwidth Constant Tension worm-drive clips are designed to be used primarily in the automotive sector. The main advantage of this clip over the standard Mikalor worm drive is to be found in the spring-loaded insert, fitted on a semi-circular support to the inside of the band.
The use of this spring-loaded insert guarantees constant pressure around the hose and the optimum performance of the clamp in case of variations in temperature, pressure or vibration. For this reason, constant tension worm-drive clips are used mainly with tubes or hoses carrying hot air or on engine refrigeration systems, as clamps used in these applications are subject to expansion and contraction due to frequent changes in temperature. ASFA L CT worm-drive clips are manufactured entirely from stainless steel, thereby ensuring good corrosion resistance. The complete range complies fully with the Directive EU 20032/95/EC.
* The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.
The use of this spring-loaded insert guarantees constant pressure around the hose and the optimum performance of the clamp in case of variations in temperature, pressure or vibration. For this reason, constant tension worm-drive clips are used mainly with tubes or hoses carrying hot air or on engine refrigeration systems, as clamps used in these applications are subject to expansion and contraction due to frequent changes in temperature. ASFA L CT worm-drive clips are manufactured entirely from stainless steel, thereby ensuring good corrosion resistance. The complete range complies fully with the Directive EU 20032/95/EC.
* The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.
Certificates / Documentation:
Certificates and documentation are available for these products. If desired, you can order these together with your order.
We can offer:
- Certificate of Conformity (CoC)
- EN 10204 3.1 Inspection Certificate
Certificates must be requested at the time of ordering. Certificates requested after shipment may incur additional administrative costs and cannot always be provided retrospectively.
You will find the certificates at the bottom of the drop-down order menu at the top right of this page.
Generally, a subsequent order is significantly more expensive due to the administrative burden.
Product code:
03017800 - 03017818 - 03017826 - 03017834 - 03017842 - 03017850 - 03017869 - 03017877 - 03017885 - 03017893 - 03017906 - 03017914 - 03017922
Specifications
| Bolt: | SW 7 mm |
| Bandwidth: | 12.2 mm |
| Tightening torque (Maximum): | 4,5 - 7 Nm (maximaal) |
Sold out
€ 105,-
*
Excl. tax
| Excl. Shipping costs
€3,42 Excl. tax
*
Excl. tax
| Excl. Shipping costs
€2,35 Excl. tax
*
Excl. tax
| Excl. Shipping costs
€1,87 Excl. tax
*
Excl. tax
| Excl. Shipping costs
€0,61 Excl. tax
*
Excl. tax
| Excl. Shipping costs
€0,78 Excl. tax
*
Excl. tax
| Excl. Shipping costs
€3,04 Excl. tax
*
Excl. tax
| Excl. Shipping costs
