IQ-Parts Pipe connector | Male Corner Lug 90° | Type 40

 

This pipe connector is similar to type 36, but has two lugs that are at a 90° angle to each other. In combination with the pipe connector type 42, a double rectangular connection piece can be made. When the lugs are connected to each other with a bolt screw, a stable, elastic connection is created with two axes that are at right angles to each other. You can choose from pipe connectors with two lugs for diameters of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). The material of the pipe connector type 40 is GALVANIZED CAST IRON.

 

Please note: When using this articulated pipe connector, the connected pipe must be firmly clamped at another location to ensure a stable construction.

 

With the pipe connectors for round tubes, you can quickly, effectively and variably create stable pipe constructions with high cost efficiency.

 

Round pipe connector for railings, barriers, exhibition stands and much more

Do you need beautiful, high-quality tube connectors for a round pipe? Our round pipe connectors are suitable for a wide range of constructions, such as scaffolding, balustrades, barriers, room dividers, frames, playgrounds, railings, fall protection, protective barriers and much more. They can be screwed on and are attached to the respective round pipe using an integrated threaded rod.

 

With these round pipe connectors made of galvanised or painted cast iron, pipes in various designs can be mounted. The Allen screws used ensure a stable connection (inside or outside). Simple and quick assembly and disassembly are also guaranteed. Most of our round pipe connectors are available at short notice and are TÜV-approved.

 

You can choose from pipe connectors in 6 different diameters. (21.3 mm, 26.9 mm, 33.7 mm, 42.4 mm, 48.3 mm and 60.3 mm).

Is your desired size not in our shop? Please contact our sales department!