IQ-Parts Diving Tank Clip | Stainless steel 316 (W5) | With EPDM Rubber profile
Brand:
Mikalor
| Article number: | MKL-A-S-W5-090-110R |
- 2 year warranty
- Delivery time: 1 week
Information
IQ-Parts Diving Tank Clip | Stainless steel 316 (W5) | With EPDM Rubber profile
This diving tank clip is suitable for mounting tank plates and ponybottle clamps on single cylinders.
The rubber U-Profile is made of EPDM and ensures that the clamps fit tightly around the tank without damaging it.
Stainless steel 316 is particularly resistant to salt water and will therefore not rust. If a clamp consists of W5, stainless steel 316, then all parts of the clamp are made of the highest quality stainless steel.
EPDM is resistant to weather and ozone influences and is very resistant to aging. This makes it ideal for use when diving.
The clamp is supplied per piece. Usually you need 2 pieces for stable installation.
The clamp is available in the following sizes:
- 90 - 110mm (3 liters)
- 110 - 130mm (4 liters)
- 130 - 150mm (7 liters)
- 160 - 180mm (10 liters)
- 170 - 190mm (12 liters long)
- 200 - 220mm (12-15 liters short)
Certificates / Documentation:
Certificates and documentation are available for these products. If desired, you can order these together with your order.
We can offer:
- Certificate of Conformity (CoC)
- EN 10204 3.1 Inspection Certificate
Certificates must be requested at the time of ordering. Certificates requested after shipment may incur additional administrative costs and cannot always be provided retrospectively.
You will find the certificates at the bottom of the drop-down order menu at the top right of this page.
Generally, a subsequent order is significantly more expensive due to the administrative burden.
Specifications
| Bolt: | SW = 7 mm |
| Bandwidth: | 12 mm |
| Tightening torque (Maximum): | 4,6 - 7 Nm (Maximum) |
Related products
